Description
12V 800mA AC/DC power supply with 5.5x2.1mm DC jack
This 12V 800mA power supply converts AC mains power to a fixed 12V DC output. It is suitable for devices consuming up to 0.8A. Its cylindrical connector has a positive center polarity.
12V DC output up to 800mA
The power supply unit delivers a fixed 12V DC voltage. The available current reaches a maximum of 800mA. A device consuming 300mA or 500mA can therefore use it. It only draws the necessary current.
This 12V 800mA power supply is therefore suitable for equipment whose consumption remains less than or equal to 800mA. However, the voltage must always match that of the device. This model is not suitable for equipment designed for 5V, 9V, or 24V.
5.5x2.1 mm center-positive DC jack
This 12V power adapter uses a DC jack with an outer diameter of 5.5 mm. Its inner diameter is 2.1 mm. The polarity is positive in the center and negative on the outside.
The 5.5x2.1 mm plug closely resembles a 5.5x2.5 mm plug. However, the two dimensions must not be confused. Check your connector carefully before ordering.
Mains input and cable
The stated input is 110 / 220V AC at 50/60Hz. The output cable measures approximately 80 cm. The mains plug is suitable for common French and European sockets.
This 12V 0.8A power supply can be used with various low-voltage electronic devices. This includes certain routers, radios, small multimedia equipment, and LED lighting.
How to check compatibility
Always check four elements before connecting: voltage, current, plug dimensions, and polarity. A voltage or polarity error can damage the device.
Some equipment uses reverse polarity, for example. Check the label of your old power supply unit before replacing it.
A 12V 800mA power supply should never be chosen based solely on voltage. The maximum current, connector, and polarity must also match the device.
You can also find our selection of fixed DC power supplies for other voltages and currents.
AC/DC external power supply
An external power supply converts mains power to a lower voltage suitable for the equipment. The European Commission describes this principle on its page dedicated to external power supplies.
Best practices before replacement
Compare the label of the original power supply unit with the specifications listed here. Above all, check the DC output. Then check the inner diameter of the connector. A minimal difference can prevent a reliable electrical contact.
Common applications
This type of power supply unit can power small electronic equipment. It may be suitable for certain network accessories or household devices. Compatibility always depends on the specifications listed on the device.
Use and maintenance
Plug the DC connector into the device before connecting the power supply unit to the mains. Do not expose the power supply to moisture. Also avoid placing excessive strain on the cable.
New product, one-year warranty. Ships within 24 to 48 hours from our stock in France.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
🇫🇷 French shop
Our mother store is based in the south, in Nice ☀️
☎️ Professional support
We are available by phone at 09 73 88 22 81
💳 Secure payments
All purchases are encrypted by our certified partners.























