Description
9V AC 1.5A power adapter for audio and pedals
This 9V AC 1.5A power adapter is an AC/AC linear power supply designed for devices requiring 9 V AC power. It is the RS PRO 139-1772 model, KRE series, with a rated power of 14 W and a maximum output current of 1.5 A. It must not be confused with a 9 V DC power supply.
The 9V AC/AC adapter has a 5.5x2.1 mm plug as its main connector and comes with an adapter for use with a 5.5x2.5 mm plug. This dual connectivity makes it easy to replace on many specific audio devices, provided that the voltage, current type, and current required by the device are checked.
Technical specifications
- Type: linear AC/AC power adapter
- Input: 230 to 240 V AC, 50/60 Hz
- Rated output: 9 V AC
- Maximum current: 1.5 A / 1500 mA
- Rated power: 14 W
- Main connector: 5.5x2.1 mm plug
- Adapter included: 5.5x2.5 mm plug
- Cable length: approximately 1.8 m
- Dimensions: approximately 89 x 60 x 51 mm
- Weight: approximately 450 g
- Mains plug: European Type C
- Operating temperature: -20 to +40 °C
- Standard: IEC/EN 61558
Compatibility with audio equipment
This 9V AC/AC adapter may be suitable for certain preamplifiers, effect pedals, synthesizers, mixing desks, and other devices that explicitly require 9 V AC power. Among the documented models, the original Line 6 DL4 requires 9 V AC with at least 1200 mA, the Numark M1 USB uses 9 V AC 1.5 A, and the Akai Miniak also uses a 9 V AC 1.5 A power supply.
Some older versions of the DigiTech JamMan use a 9 V AC power supply and may require a 5.5x2.5 mm plug. Other generations are powered by direct current. Therefore, you should always check the device label before connecting it.
AC and DC are not interchangeable
An AC/AC power supply provides alternating voltage. There is therefore no positive or negative polarity to observe as with a DC power supply. An identical plug is not enough to guarantee compatibility: a device marked 9 V DC must not be powered by this supply.
RS documentation indicates that a voltage higher than 9 V may be measured when no load is connected, with approximately 11.2 V AC without a load and 9 V AC at full load. This behavior is normal for this type of linear transformer.
Before connecting
Check that your device requires 9 V AC, that its power consumption does not exceed 1.5 A, and that its connector accepts the 5.5x2.1 mm plug or the included 5.5x2.5 mm adapter. If in doubt, compare the specifications of your original power supply.
Find this 9V AC/AC adapter in our range of AC power supplies. For the manufacturer's specifications, see the official RS PRO 139-1772 data sheet.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
🇫🇷 French shop
Our mother store is based in the south, in Nice ☀️
☎️ Professional support
We are available by phone at 09 73 88 22 81
💳 Secure payments
All purchases are encrypted by our certified partners.


















