Description
BAES 131607 NiCd Battery
The BAES 131607 NiCd battery is a 3.6V 4Ah rechargeable pack designed for certain emergency lighting equipment. This assembly of D-size nickel-cadmium cells is designed for devices matching its electrical specifications, dimensions, and connector.
BAES 131607 NiCd Battery: Specifications
The 131607 battery delivers a nominal voltage of 3.6V and a stated capacity of 4Ah. The pack uses D-size cells and measures approximately 98 × 33 × 62 mm. These values should be compared with the original battery before placing an order.
This 3.6V NiCd battery is rechargeable. NiCd technology is still used in certain emergency lighting units designed for continuous charging. Do not replace this pack with a different technology without checking the compatibility of the charging circuit.
Use in emergency lighting
This emergency lighting battery is intended for devices using reference 131607 or a strictly equivalent pack. Also check the polarity, connection type, and physical arrangement of the cells, as two batteries with the same voltage may not be interchangeable.
For other references, see our emergency lighting battery collection. General information about NiCd technology is available on the ARTS Energy website.
Installation and maintenance
Before working, switch off the equipment according to the manufacturer's instructions. Identify the polarity and wiring before removing the old pack. Install the 131607 battery without modifying the connector if it matches.
After replacing the BAES 131607 NiCd battery, allow the equipment to complete its normal charging cycle, then perform the functional test. Avoid short circuits, prolonged deep discharges, and the use of an unsuitable charger.
This 3.6V NiCd battery is checked before shipping. Stocked in France and shipped within 24 to 48 hours depending on availability.
Pre-replacement check
Before ordering, record the information from the old pack and compare it with this reference. Check the voltage, capacity, technology, format, dimensions, and polarity. Also check the connector and wire arrangement. Two visually similar batteries may have different wiring.
During installation, do not pull on the wires or force the connector. Once the pack is installed, allow the equipment to complete its normal charging cycle. Then run the test provided by the unit manufacturer. This check confirms the proper operation of the charging and emergency lighting.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
🇫🇷 French shop
Our mother store is based in the south, in Nice ☀️
☎️ Professional support
We are available by phone at 09 73 88 22 81
💳 Secure payments
All purchases are encrypted by our certified partners.





















