The SPIT 328 battery reconditioning allows us to explore a solution for restoring a professional tool. This is particularly useful when its battery no longer holds a charge.
A rotary hammer battery that no longer holds a charge does not necessarily condemn the tool. Its reconditioning can be a solution. Our Accessoires Énergie workshop reconditions professional batteries that have become weak. We also look into references that are difficult to find or limited in autonomy.
This SPIT 328 battery reconditioning project concerns a 28 V lithium-ion pack intended for professional tools. We rebuilt the internal pack to achieve a capacity of 7 Ah. The original housing is retained when its condition and the electronics allow it.

SPIT 328 Lithium 28 V battery reconditioning
The SPIT 328 range was marketed with several battery versions. Reference 054254 corresponds to 28 V and 3.2 Ah. The 054462 is rated at 28 V and 4.2 Ah. These specifications are found in the SPIT technical documents. Among the frequently searched references are notably the SPIT 054254 and SPIT 054462, depending on the generation of the tool and the battery.
When a SPIT 328 battery becomes difficult to replace, the SPIT 328 battery repair can be considered. In this context, reconditioning can extend the use of a rotary hammer that is still perfectly functional. Each intervention is subject to a study. We check the housing, the connectors, the electronics, and the charger.

Switching to a large-capacity 7 Ah battery
On this battery, our workshop created a new lithium-ion assembly with a capacity increased to 7 Ah. The goal is to significantly increase the available energy and thus the potential autonomy of the tool between two charges.
A capacity of 7 Ah is significantly higher than the capacities commonly found on the older batteries in this range. The actual autonomy gain depends on the work performed and the power required. The temperature and the condition of the tool also play a role.
How does the reconditioning of a tool battery take place?
The reconditioning of a professional tool lithium-ion battery does not simply consist of replacing a few cells. It is necessary to respect the electrical architecture of the pack, the mechanical constraints of the housing, and the operation of the management electronics.
- Opening and diagnosis of the existing battery.
- Inspection of the housing, contacts, and connectors.
- Identification of the lithium-ion pack architecture.
- Replacement of the cells with an assembly adapted to the required power.
- Reconstruction of the electrical connections and control of the electronics.
- Reintegration of the pack into the original housing.
- Pre-service checks.

Lithium-ion cells and large-capacity assembly
The photos of this project show the open pack, its cylindrical lithium-ion cells, the internal connections, as well as the management electronics. This assembly requires cells adapted to a power tool. The battery can indeed be subjected to high currents.
Depending on the battery version, some SPIT 328 configurations use a 7 groups in series architecture. We can therefore encounter the designations 25.9 V nominal and 28 V in this family. Compatibility must always be checked on the received battery before intervention.

Why have a SPIT battery repaired or reconditioned?
Reconditioning is interesting when a SPIT 328 battery is hard to find. It sometimes allows you to keep a reliable tool without replacing the entire equipment.
Depending on technical feasibility, it may also be possible to offer a capacity increase. In this specific case, switching to 7 Ah provides a larger capacity pack. The original format is reused.
SPIT 328 battery 054254, 054462: beware of the different versions
Internet searches show several references related to the SPIT 328 range, including references 054254 and 054462. They should not be considered interchangeable without prior inspection.
For a quote, send the exact reference, voltage, capacity, and a few photos of your battery. This allows us to identify the version and study the best reconditioning solution.
Reconditioning of power tool batteries in Nice
Our workshop Accessoires Énergie in Nice performs repairs, custom assemblies, and battery reconditioning for many professional equipment: rotary hammers, drills, screwdrivers, and other power tools.
We work on different technologies. We notably look into batteries that have become hard to find and requests for increased autonomy.
You can also discover our other project dedicated to the reconditioning of a SPIT 328 24 V NiMH battery.
Do you have a SPIT 328 battery, a lithium-ion tool battery, or a reference that has become hard to find? Contact Accessoires Énergie for a feasibility study.




