Reconditionnement batterie PELLENC ULiB 400 44 V : de 8,8 Ah à 11 Ah

The PELLENC battery reconditioning allows us to study the refurbishment of a ULiB 400 that has become less autonomous. Our Energy Accessories workshop took charge of a PELLENC Ultra Lithium Battery 400, reference 66625. This project concerns a pack used with professional olive harvesting tools.

The battery presented was rated at 44 V and 8.8 Ah. We rebuilt it in 44 V and 11 Ah, keeping its original housing. This intervention describes our work in the workshop. It does not correspond to a new capacity announced by the manufacturer.

Reconditioned PELLENC ULiB 400 44 V battery in 11 Ah

PELLENC ULiB 400 battery reconditioning: upgrade to 11 Ah

The upgrade from 8.8 Ah to 11 Ah represents 25% additional capacity. At the same voltage, the theoretical energy goes from approximately 387 Wh to 484 Wh. These values result from the calculation of voltage multiplied by capacity.

For an olive harvester battery, this reserve can provide more autonomy between two charges. The real result depends on the tool and the work required. The temperature and the condition of the equipment also play a role. A 25% capacity increase does not therefore guarantee 25% additional duration.

PELLENC 66625 44 V 8.8 Ah battery reconditioned in 11 Ah

Identify the battery and check the harvesting tool

The PELLENC ULiB 400 belongs to the family of professional lithium batteries of the brand. Some generations power harvesting equipment, notably OLIVION vibrating combs. Each combination must be checked before intervention.

An olive harvester battery must be precisely identified. The reference 66625 appears on the housing presented here. Also check the voltage, the capacity and the charger used. An external resemblance is not enough to establish an equivalence.

PELLENC Ultra Lithium Battery 400 reference 66625

PELLENC battery repair: keep a usable pack

A pack can lose its performance while its housing remains usable. However, the connections and electronics must be examined. An old battery is not automatically repairable.

The PELLENC battery reconditioning allows, when its design allows it, to:

  • keep the original housing;
  • replace the aging lithium-ion cells;
  • preserve the connector suitable for the tool;
  • extend the use of professional equipment;
  • study a capacity increase according to the available space.

The goal is to keep a coherent assembly. Capacity is not the only criterion for choosing cells. Electrical and mechanical constraints must also be respected.

PELLENC ULiB 400 olive harvester battery

A studied intervention in our workshop

Before a PELLENC battery repair, each pack is subject to an individual study. We examine the voltage, the electronics, the size and the connectivity. The power constraints must remain adapted to the tool.

This PELLENC battery reconditioning allowed reaching 11 Ah on the presented model. This possibility depends on the selected cells and the available space. The operation of the original electronics also conditions the feasibility.

The diagnosis avoids confusing a loss of capacity with another defect. A charging problem may require examining the charger or the contacts. Describe the observed symptoms and the conditions of use. This information guides the study of the received equipment.

Original housing of the PELLENC ULiB 400 battery

Olive harvester battery hard to find or tired?

Are you looking for a PELLENC battery repair for an old pack that no longer holds a charge? Send the following information to our workshop:

  • exact reference written on the battery;
  • voltage and capacity indicated on the label;
  • photos of the housing, the label and the connections;
  • model of the tool and reference of the charger;
  • description of the breakdown or the loss of autonomy.

These elements facilitate the identification of your version. They also allow preparing the study of the pack. A capacity increase remains subject to technical feasibility. The result of this realization must not be generalized to all PELLENC batteries.

For a PELLENC battery reconditioning, contact Accessoires Énergie in Nice with this information. Our workshop will be able to study your request before intervention.

Consult the official PELLENC manuals to find the original instructions. The manuals of the ULiB generations allow specifying the equipment concerned.

Discover also our reconditioning of a SPIT 328 Lithium battery in 7 Ah. Our other realization presents a lithium battery of a floor scrubber passed from 4 Ah to 7 Ah.

Leave a comment

All comments are moderated before being published

Recent Articles

Batterie terminal VingCard 4821953 et terminal de service ASSA ABLOY Elsafe

VingCard terminal battery: find the right part number

How to find the right battery for a VingCard ASSA ABLOY Elsafe service terminal: where to find the part number, the difference between 4821953 and 4821593, and 1600 or 2000 mAh compatibility.

Piles d’alarme : guide pour la maison et la piscine

Alarm batteries: guide for the home and the pool

Home, siren, detector or pool: discover the criteria for choosing the right batteries for your alarm and browse our ranges by brand.

Reconditionnement batterie PELLENC ULiB 400 44 V : de 8,8 Ah à 11 Ah

Battery refurbishment PELLENC ULiB 400 44 V: from 8.8 Ah to 11 Ah

Reconditioning of a PELLENC ULiB 400 battery, ref. 66625: upgrade from 44 V 8.8 Ah to 44 V 11 Ah, i.e., +25% capacity, for greater autonomy.