VingCard terminal battery: why the reference matters
The VingCard terminal battery powers the portable service terminal used to program and maintain ASSA ABLOY electronic hotel locks. When it wears out, the terminal can no longer last for a full maintenance round. Several batteries in this family look very similar. An incorrect reference could lead you to order a pack that does not fit or make contact.
This guide helps you identify the correct battery before ordering.
Where to find your battery's reference
Turn off the terminal, then open the compartment on the back of the device. The battery label provides several useful pieces of information:
- the VingCard reference, for example 4821953;
- the model, for example OVT151L2R00;
- the GES part number, for example VC-52301622-R;
- the original cell, for example SANYO UF553443Z;
- the voltage, 3.7 V in this case.
The terminal also has its own label, showing the system reference, for example HW 4821915. Take a photo of both labels: you can use them for comparison.
References to know
| Reference | What it refers to |
|---|---|
| 4821953 | VingCard service terminal Li-ion battery |
| HW 4821915 | System of the terminal concerned |
| OVT151L2R00 | Battery model |
| VC-52301622-R | GES part number |
| UF553443Z | Original SANYO cell |
| 1ICP8/48/71-2 | Standard designation for the prismatic Li-ion cell |
4821953 and 4821593: beware of confusion
These two numbers differ only by two reversed digits. The 4821593 is often offered with 1600 mAh for other Elsafe terminals, such as the VOT1511L2R01 model. It is not automatically equivalent to the 4821953. Always check the voltage, contact arrangement, and dimensions.
1600 mAh or 2000 mAh: is it compatible?
The capacity in mAh indicates battery life, not compatibility. A 2000 mAh battery can replace a 1600 mAh battery if the voltage remains 3.7 V, the technology is the same (Li-ion), and the contacts and format match. The terminal will then last a little longer between charges.
Conversely, a battery with the same capacity but a different format or voltage will not fit.
Properly maintaining the VingCard terminal battery
A Li-ion battery ages more slowly if you avoid letting it become completely empty. Recharge the terminal after each maintenance round rather than waiting for it to turn off. If the terminal is stored for several weeks, leave the battery half charged and store it in a temperate place, away from heat sources. Heat is the main enemy of lithium batteries. Finally, if the battery life drops significantly or the battery swells, stop using it and replace it.
Replacing the battery safely
- Turn off the terminal before opening the compartment.
- Align the three contacts of the new battery carefully.
- Never use a pack with a different voltage or technology.
- Perform a full charge before the first intensive use.
- Place the old battery in a collection point so it can be recycled.
To learn more about this technology, visit the Lithium-ion battery page on Wikipedia.
Stock version or workshop version?
We offer two versions of the VingCard 4821953 battery:
- the ASSA ABLOY VingCard 4821953 battery, in the original battery format, in stock and shipped within 24 to 48 hours;
- the custom VingCard 4821953 battery, assembled in our Nice workshop in about 10 business days.
Both deliver 3.7 V and 2000 mAh. We ship worldwide. For other professional packs, browse our collection of specific batteries.
In doubt? Send us a photo
Send a photo of your old battery's label and the terminal's label to boutique@accessoires-energie.com. We will confirm the correct reference before you place your order.
In English
Looking for a VingCard service terminal battery? Check the label of your old battery: reference 4821953, model OVT151L2R00, PN VC-52301622-R, 3.7 V. Do not confuse it with 4821593, a different 1600 mAh pack. Our 3.7 V 2000 mAh replacement is in stock in France and we ship worldwide.



