Reconditionnement batterie autolaveuse : de 4 000 à 7 000 mAh

Scrubber battery refurbishment: a 24 V project

The scrubber battery refurbishment presented here concerns a project carried out in our workshop, and not a conversion applicable to all machines.

A scrubber battery that has become too weak or difficult to replace does not necessarily mean the machine is beyond repair. In our Accessoires Énergie workshop, we study and refurbish custom battery packs when the configuration allows it.

For this project, we worked on a 24 V lithium scrubber battery initially rated at 4,000 mAh. After studying the casing, electronics, and available space, we created a new pack with a capacity of 7,000 mAh.

24 V 7,000 mAh lithium scrubber battery refurbishment in our workshop

From 4,000 mAh to 7,000 mAh: +75% capacity

The increase from 4,000 mAh to 7,000 mAh represents a 75% capacity increase. At the same voltage, this theoretically provides more onboard energy and therefore increases operating autonomy. Actual autonomy, of course, depends on the scrubber's power consumption and its operating conditions.

Scrubber battery opened before refurbishment

A custom-made lithium assembly

Refurbishment of this type does not simply involve replacing a few cells. Several constraints must be taken into account: internal space, pack architecture, wiring, connectors, mechanical protection, and battery management electronics.

The new pack was integrated into the original casing to maintain compatibility with the device. The goal was to make the best use of the available space while maintaining a clean build suitable for professional use of the machine.

New 24 V 7,000 mAh lithium pack with cells and management electronics

Why refurbish a scrubber battery?

Refurbishment can be particularly interesting when the original battery has become difficult to find, when a full replacement is expensive, or when greater autonomy is desired.

In some cases, it is possible to keep the original casing while increasing the capacity. This possibility always depends on the battery design, the available space, and the electrical characteristics of the equipment.

Scrubber battery refurbishment work in our workshop

Scrubber battery refurbishment: a case-by-case study

Every battery received is different. Before any intervention, we therefore check the feasibility of the refurbishment and the optimization possibilities. A capacity increase is only offered when it is technically compatible with the casing, electronics, and use of the machine.

Custom-made 24 V 7,000 mAh lithium scrubber battery assembly

Is your battery hard to find or lacking autonomy?

Our Accessoires Énergie workshop carries out custom battery refurbishments and assemblies for many professional and personal equipment.

Do you have a scrubber battery, a specific pack, or a battery that has become impossible to find? Contact us with the reference, voltage, capacity, and a few photos of the battery. We can study the possibility of refurbishing it and, when appropriate, increasing its capacity.

Checking the complete system before intervention

Troubleshooting must also take into account the charger, contacts, and the machine's behavior. A connection or charging fault can cause a performance loss comparable to that of an aging pack. A diagnosis therefore precedes the decision to replace the cells. A damaged, deformed lithium pack, or one showing unusual overheating, must be reported before any handling or shipping.

Keeping the original casing maintains the external dimensions, but is not enough to validate the whole. The connections, protections, and characteristics of the new assembly must suit the expected operation. The stated capacity does not describe by itself the available current or compatibility with the device.

To prepare your scrubber battery refurbishment request, consult our refurbishment service and ecosystem safety recommendations. The information in the quote must relate to your own equipment: this study does not constitute a promise of an identical result for another reference.

Frequently Asked Questions

Is scrubber battery refurbishment always possible?

No. The condition of the casing, electronics, internal assembly, and machine constraints must be examined. The project described here concerns a specific case.

Does the increase from 4,000 to 7,000 mAh provide 75% more autonomy?

It represents 75% additional nominal capacity. Actual operating time depends on the workload, motor, operating conditions, and the condition of the machine.

Can the charger be kept?

This must be checked during the study: technology, charging voltage, and protections must suit the assembled pack. A capacity increase can also lengthen the charging time.

What needs to be sent for a study?

Start by sending the label, the machine reference, photos of the pack and charger, as well as the symptoms. Wait for the workshop's instructions before shipping.

Leave a comment

All comments are moderated before being published

Recent Articles

Batterie terminal VingCard 4821953 et terminal de service ASSA ABLOY Elsafe

VingCard terminal battery: find the right part number

How to find the right battery for a VingCard ASSA ABLOY Elsafe service terminal: where to find the part number, the difference between 4821953 and 4821593, and 1600 or 2000 mAh compatibility.

Piles d’alarme : guide pour la maison et la piscine

Alarm batteries: guide for the home and the pool

Home, siren, detector or pool: discover the criteria for choosing the right batteries for your alarm and browse our ranges by brand.

Reconditionnement batterie PELLENC ULiB 400 44 V : de 8,8 Ah à 11 Ah

Battery refurbishment PELLENC ULiB 400 44 V: from 8.8 Ah to 11 Ah

Reconditioning of a PELLENC ULiB 400 battery, ref. 66625: upgrade from 44 V 8.8 Ah to 44 V 11 Ah, i.e., +25% capacity, for greater autonomy.