Description
12 V 1.3 A lead battery charger with crocodile clips
12 V lead battery charger designed for recharging small rechargeable batteries using a low-current regulated charge. It connects directly to the terminals thanks to a red positive clip and a black negative clip. Its compact format is mainly suitable for motorcycle, scooter, electric toy, alarm or emergency lighting batteries.
Technical specifications
The input accepts a mains supply between 100 and 240 V AC at 50 or 60 Hz. The 12 V 1.3 A charger is rated with a constant current between 0.85 and 1.25 A. Its charging voltage is approximately between 13.8 and 14.2 V depending on the operating phase.
The housing measures approximately 85 x 48 x 30 mm and weighs approximately 90 g. The mains cable measures approximately 65 cm and the output cable approximately 85 cm. The battery crocodile clips allow direct connection to accessible terminals. An LED indicator shows the operation of the charger.
The stated protections include overcharge and short-circuit protection with automatic recovery. As the presence of reverse polarity protection is not confirmed, the connection polarity must be strictly respected.
Compatible batteries and applications
This model is mainly suitable for small 12 V lead batteries of the AGM, GEL, SLA or VRLA type when their manufacturer authorizes a current close to the one delivered. The battery capacity and the manufacturer's instructions remain paramount.
The 12 V 1.3 A charger can be used for certain motorcycle, scooter, lawn mower, electric toy, alarm system, emergency lighting or small UPS batteries. A high-capacity car battery would require a very long recharge time. This product is therefore not a fast car charger.
Check before ordering
Check that the battery uses lead technology and has a nominal voltage of 12 V. Also check its capacity, its recommended charging current and the accessibility of its terminals.
This charger is not suitable for Lithium-ion, LiFePO4, NiMH or NiCd batteries. A battery bearing only the 12 V mention is not automatically compatible.
Consult our collection of lead battery chargers to compare the other available currents. For general information on lead batteries and their maintenance, also consult the official Yuasa website.
Connection and safety
With the charger disconnected from the mains, connect the red clip to the positive terminal then the black clip to the negative terminal. Then plug in the mains plug. At the end of the charge, disconnect the mains first before removing the battery crocodile clips.
Use the product only indoors in a dry and ventilated place. Do not cover the housing during operation. Do not use the charger if the plug, cable, clips or housing are damaged.
Control and shipping
The product is new and checked before shipping. The 12 V lead battery charger is prepared from our stock in France and shipped within 24 to 48 hours depending on the displayed availability.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
🇫🇷 French shop
Our mother store is based in the south, in Nice ☀️
☎️ Professional support
We are available by phone at 09 73 88 22 81
💳 Secure payments
All purchases are encrypted by our certified partners.















