Description
63V 1.1A 3-pin charger for Segway Ninebot Mini
The 63V 1.1A 3-pin charger can replace a mains charger with the same electrical specifications and connector. This model is particularly suitable for users of Segway Ninebot Mini Pro and Mini Lite hoverboards, some versions of which use a 63V charging supply with a three-contact connector. Compatibility with your device must be verified before ordering.
Electrical specifications
The charger accepts a mains voltage of 100 to 240V AC, 50/60 Hz. Its output is 63V DC at 1.1A, with a calculated rated power of 69.3W. It features a black enclosure and a 3-pin output connector. The existing plug indicates OVP and OCP protection against overvoltage and overcurrent. The standardized plug type and polarity configuration still need to be confirmed.
Segway Ninebot models to consider
Chargers with the same voltage, current, and number of pins are marketed for the Ninebot Mini Pro, Ninebot Mini Lite, and some Ninebot Mini models. However, connector versions may differ depending on the device and series. A four-contact charger should not be replaced by this three-contact model without technical verification. The commercial references of competing chargers do not constitute the manufacturer's reference for this generic item.
How to check compatibility?
Compare the original charger's label: the output must match 63V, and the charging current must be suitable for the battery. Then examine the shape of the plug, its diameter, its three contacts, its keying, and especially the pin configuration and polarity. Two visually similar plugs may be wired differently. Never connect a charger whose polarity or voltage has not been confirmed. The number of pins alone is not sufficient to establish compatibility.
Use and maintenance
Install the charger in a dry, ventilated area, away from moisture and heat sources. Avoid covering its enclosure during charging. Unplug it after use and regularly check the condition of the cable and connector. Do not use damaged equipment. If in doubt, seek advice before connecting it.
Other version available
For devices using a different plug, see our 63V 1.1A 4-pin charger. To identify your hoverboard, you can also visit the official Segway website. Send us a photo of your old charger and its plug so we can compare the specifications before purchase.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
🇫🇷 French shop
Our mother store is based in the south, in Nice ☀️
☎️ Professional support
We are available by phone at 09 73 88 22 81
💳 Secure payments
All purchases are encrypted by our certified partners.
























