Description
4.2V 2A Charger for 1S Lithium-Ion Battery
The 4.2V 2A charger recharges 1S lithium-ion batteries designed for a 4.2 V end-of-charge voltage. It has a 5.5 × 2.1 mm male DC plug and plugs into a European mains socket. Before choosing it, check your battery's technology, charging voltage, polarity, and the charging current it accepts.
1S Li-ion Charger: Technical Specifications
- Input: 100–240 V AC, 50/60 Hz
- Output voltage: 4.2 V DC
- Output current: 2 A
- Maximum output power: 8.4 W
- Battery technology: lithium-ion
- Configuration: 1S, one group of cells in series
- Connector: 5.5 × 2.1 mm male DC plug
- Cable length: 80 cm
- Indicator light: red during charging, green when charging is complete
- Color: black
- Contents: one mains charger with cable
What battery can use this 4.2V 2A charger?
This 1S Li-ion charger is intended for batteries with a nominal voltage of generally 3.6 or 3.7 V and a maximum charging voltage of 4.2 V. The allowable current must match the 2 A output. A small battery should not receive this current if its manufacturer does not authorize it.
The 1S designation describes the number of groups in series. It can therefore apply to a single cell or several identical cells mounted in parallel in a properly designed pack. The physical format of the cell, for example 18650, is not enough to establish compatibility.
5.5 × 2.1 mm DC connector and polarity
Check both diameters of the plug and the polarity of your setup. A similar socket may have a different inner diameter. This lithium battery charger must only be connected to a suitable charging input; it does not include a holder designed to directly receive a bare cylindrical battery.
Use and charging indicator
Plug in the 4.2V 2A charger after checking the connections. The red light indicates charging and the green light indicates its completion when the assembly is working normally. Disconnect the battery after use and stop charging in case of unusual heating or an anomaly.
Use this lithium battery charger in a dry place, on a clear surface. It is not suitable for LiFePO4, NiMH, NiCd, or lead batteries, nor for Li-ion packs containing several groups in series. The battery protection circuit does not replace a suitable charger.
Find our Li-ion chargers. Also consult the lithium-ion charging principles published by Adafruit. In stock in France, shipping within 24 to 48 hours. Reference: CH-4,2V-2A.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
🇫🇷 French shop
Our mother store is based in the south, in Nice ☀️
☎️ Professional support
We are available by phone at 09 73 88 22 81
💳 Secure payments
All purchases are encrypted by our certified partners.




















