Beschreibung
Motorcycle & Scooter Battery Charger
6v and 12v
Article content
1 x Battery Charger
1 x set of charging cable (clamps)
1 x user manual
Features :
6V 5A / 12V 5A,
Microprocessor controlled charging current: 5AMax
Charging programs: DC 2 (6V/12V)
Charging voltage: 6V mode: 7.2V / 12V mode: 14.4V
Charging steps: 3
Minimum operating voltage: 2.5V
Battery charger for fully automatic 3-step charging
The charger is suitable for conventional 6V and 12V lead-acid batteries (lead-acid, AGM, Gel, CA/CA maintenance-free).
Use :
> Manually select the required charging voltage (6V or 12V) and the microprocessor controlled charger will automatically carry out the entire battery charging process until the end of the charge cycle and the charge maintenance.
> An LED indicator informs you about the progress of the charging process, whether charging is complete or whether the connection has been made incorrectly. Modern safety technology with reverse polarity protection, overheating protection, overload protection and short circuit protection ensures your safety.
Attention
1. Check the charger cables carefully before use. Make sure that no cracks have occurred on the cable or the anti-kink protection. A charger with a damaged cable should not be used. A damaged cable should be replaced by a qualified professional.
2. Never charge a damaged battery.
3. Never charge a frozen battery.
4. A battery that is being charged can emit explosive gases. Avoid sparks near the battery. When a battery reaches the end of its life cycle, sparks may occur.
5. Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin or eyes, and seek medical attention immediately.
6. Store and use the battery charger out of reach of children and ensure that children cannot play with the charger.
> Connect and disconnect the charger to the battery
Warning: Please connect or disconnect the charger to the battery according to the instructions below.
Charging a separate lead-acid battery
1. Connect the red clamp or cable to the Positive pole of the battery ("+").
Connect the clamp or cable to the negative pole of the battery ("-").
2. Insert the mains plug into the power socket
3. To disconnect, first unplug the mains plug from the power outlet, then disconnect the clamps or cables from the battery poles.
Charging a lead-acid battery mounted on a vehicle
1. Connect the red clamp to the positive pole of the battery, the black clamp to the vehicle chassis and keep away from the fuel pipe and battery.
2. Insert the power plug into the power outlet.
3. Before disconnecting, first remove the main plug from the power outlet.
4. Then disconnect the black clamp before the red clamp.
Connection protection
This feature will prevent the battery and charger from being damaged by improper connection.
6v and 12v
Article content
1 x Battery Charger
1 x set of charging cable (clamps)
1 x user manual
Features :
6V 5A / 12V 5A,
Microprocessor controlled charging current: 5AMax
Charging programs: DC 2 (6V/12V)
Charging voltage: 6V mode: 7.2V / 12V mode: 14.4V
Charging steps: 3
Minimum operating voltage: 2.5V
Battery charger for fully automatic 3-step charging
The charger is suitable for conventional 6V and 12V lead-acid batteries (lead-acid, AGM, Gel, CA/CA maintenance-free).
Use :
> Manually select the required charging voltage (6V or 12V) and the microprocessor controlled charger will automatically carry out the entire battery charging process until the end of the charge cycle and the charge maintenance.
> An LED indicator informs you about the progress of the charging process, whether charging is complete or whether the connection has been made incorrectly. Modern safety technology with reverse polarity protection, overheating protection, overload protection and short circuit protection ensures your safety.
Attention
1. Check the charger cables carefully before use. Make sure that no cracks have occurred on the cable or the anti-kink protection. A charger with a damaged cable should not be used. A damaged cable should be replaced by a qualified professional.
2. Never charge a damaged battery.
3. Never charge a frozen battery.
4. A battery that is being charged can emit explosive gases. Avoid sparks near the battery. When a battery reaches the end of its life cycle, sparks may occur.
5. Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin or eyes, and seek medical attention immediately.
6. Store and use the battery charger out of reach of children and ensure that children cannot play with the charger.
> Connect and disconnect the charger to the battery
Warning: Please connect or disconnect the charger to the battery according to the instructions below.
Charging a separate lead-acid battery
1. Connect the red clamp or cable to the Positive pole of the battery ("+").
Connect the clamp or cable to the negative pole of the battery ("-").
2. Insert the mains plug into the power socket
3. To disconnect, first unplug the mains plug from the power outlet, then disconnect the clamps or cables from the battery poles.
Charging a lead-acid battery mounted on a vehicle
1. Connect the red clamp to the positive pole of the battery, the black clamp to the vehicle chassis and keep away from the fuel pipe and battery.
2. Insert the power plug into the power outlet.
3. Before disconnecting, first remove the main plug from the power outlet.
4. Then disconnect the black clamp before the red clamp.
Connection protection
This feature will prevent the battery and charger from being damaged by improper connection.
Security and payments
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Motorcycle Battery Charger
🇫🇷 French shop
Our mother store is based in the south, in Nice ☀️
☎️ Professional support
We are available by phone at 09 73 88 22 81
💳 Secure payments
All purchases are encrypted by our certified partners.