Description
CR1/3N-FT1 3V lithium three-pin battery for PCB
This CR1/3N-FT1 battery is a non-rechargeable 3V lithium battery, equipped with three pins for soldering onto a printed circuit board. Two pins correspond to the positive terminal and one to the negative terminal according to the specifications for this model. Check the placement of the old battery before ordering.
Technical specifications
- Model: CR1/3N-FT1
- Product code: 6131-301-501
- Technology: primary lithium
- Nominal voltage: 3V
- Termination: three solderable pins
- Indicated configuration: two positive pins and one negative
- Indicated diameter: 12 mm
- Indicated height: 11 mm
- Indicated weight: 5 g
- Rechargeable: no
Check the pins and polarity
A three-pin battery must match the printed circuit board it is installed on. The number of pins is not enough: compare their layout, center-to-center distance, length, and polarity. A different layout can prevent installation or cause incorrect connection, even if the cell format appears identical.
Before desoldering the old battery, photograph its orientation and note the markings on the circuit board. The FT1 model designation here refers to a version intended for board mounting. It should not be chosen solely based on the outer diameter or its resemblance to another lithium battery.
Installation on a printed circuit board
The CR1/3N-FT1 battery must be installed in equipment designed for this type of 3V primary power supply. The installation should be carried out by a competent person. Solder only to the pins provided for this purpose, without heating the metal body of the cell directly.
After replacement, check the connections, insulation, and absence of short circuits before putting the device back into service. The equipment-specific backup or setting procedures must be followed according to its manual; a new battery does not fix a circuit board failure.
Use and safety
This three-pin battery is not rechargeable. Do not use it in a circuit that automatically recharges a battery. Do not attempt to recharge, open, puncture, or expose it to fire. Protect the pins against accidental contact with metal during storage.
Keep new and used batteries out of reach of children. Dispose of the old battery at a suitable collection point.
Documentation and other versions
Compare the CR1/3N version without this layout before choosing the required installation. The VARTA technical guide for primary lithium batteries presents the principles of this family of batteries.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
🇫🇷 French shop
Our mother store is based in the south, in Nice ☀️
☎️ Professional support
We are available by phone at 09 73 88 22 81
💳 Secure payments
All purchases are encrypted by our certified partners.






















