DIGITAL MULTIMETER - CAT III 300 V / CAT II 500 V - 10 A - 1999 COUNTS - NCV / LED / DATA HOLD / BACKLIGHT
Specifications
DC voltage: 0-200mV/2000mV/20V/200V/500V
basic accuracy: ± (1.0 % of reading + 2 digits )
input impedance: 1 Mohm
overload protection: 500 V DC or AC RMS
AC voltage: 0-200V/500V
basic accuracy: ± (1.5 % of rdg + 3 digits)
input impedance: 450 kOhm
overload protection: 500 V DC or AC rms
frequency range: 40-500Hz
display: rms value of sine wave (average value)
resistance: 0-200 Ohm / 2000 Ohm / 20 kOhm / 200 kOhm / 2000 kOhm
basic accuracy: ± (1.0 % of reading + digits); ± (2.0 % of display + 2 digits)
resolution: 0.1 u A / 1 u A / 10 u A / 100 u A
overload protection: 0.5 V / 500 V fuse
DC current: 0-200 µA / 2000 µA / 20 mA / 200 mA
basic accuracy: ± (1.5 % of rdg + 2 digits)
overload protection: 0.5 A / 500 V fuse
diode measurement: measures the forward voltage of the diodes
test voltage: ±1.8V
overload protection: 0.5 A / 500 V fuse
continuity buzzer: the built-in buzzer sounds in case of resistance lower than 50 Ω
test voltage: ±1.8V
non-contact detection of an AC voltage: detection (NCV)
buzzer: the built-in buzzer sounds when voltage is detected
test voltage range: 90 V - 1000 V AC rms
accuracy: ± (a% display + b digit)
display: 3 1/2 digit LCD
battery: 2 x 1.5 V AAA/R03P battery (incl.)
dimensions: 125 x 75 x 25mm
weight: 110g