10S 36V 3A Li-ion
Scooter Charger 42V 2a output for 36V
Ebike battery, scooter, bicycle
GX16 DC 3-pin XLR connector
description :
Input voltage: 100-240V 50/60HZ
Output voltage: 42V
Output current: 2A
Plug: XLR - CANON 3 points > check the polarity of the plug before connecting
Plug type: EU
Safety Standard: CE/RoHS
Operating Temperature/Humidity: -10°C-50°C,20%-90% RH
-Charging indicator: the charging red light, green full light.
- Safety protection: OVP / OCP / overload protection / short circuit protection
Charger Use and Care:
1. When charging, first connect the battery, then the charger to AC power
After filling, switch off the charger, then remove the plug from the battery.
If you remove the battery plug first while charging, especially when
charging current is large (red light), you may damage the charger.
2. When the LED indicator turns green, continue charging for 2-3 hours.
3 Never leave the battery for more than 3 months without being recharged because a deep discharge (too low voltages) can damage the battery
4. Please use the charger in a dry place and a temperate place.
5. When not using the charger, disconnect it from the 220v mains.
6. Check your battery, as the charger is intended to charge a 36v lithium ion battery.
Do not use the charger on a LiFepo4 battery, otherwise the charger will get very hot.
Our chargers are guaranteed for 1 year.