DIGITAL MULTIMETER - CAT III 300 V / CAT II 500 V - 10 A - 1999 COUNTS

DIGITAL MULTIMETER - CAT III 300 V / CAT II 500 V - 10 A - 1999 POINTS - NCV / LED / DATA HOLD / BACKLIGHT

Specifications
DC voltage: 0-200mV/2000mV/20V/200V/500V
Basic accuracy: ± (1.0% of display + 2 digits)
Input impedance: 1 Mohm
Overload protection: 500 V DC or AC RMS
AC voltage: 0-200V / 500V
Basic accuracy: ± (1.5% of display + 3 digits)
Input impedance: 450 kOhm
overload protection: 500 V DC or AC rms
frequency range: 40-500 Hz
display: rms value of sine wave (average value)
resistance: 0-200 Ohm / 2000 Ohm / 20 kOhm / 200 kOhm / 2000 kOhm
Basic accuracy: ± (1.0% of display + digits); ± (2.0% of display + 2 digits)
resolution: 0.1 u A / 1 u A / 10 u A / 100 u A
Overload protection: 0.5V/500V fuse
DC current: 0-200 µA / 2000 µA / 20 mA / 200 mA
Basic accuracy: ± (1.5% of display + 2 digits)
Overload protection: 0.5 A / 500 V fuse
diode measurement: measures the forward voltage of diodes
test voltage: ± 1.8 V
Overload protection: 0.5 A / 500 V fuse
Continuity buzzer: the built-in buzzer sounds when the resistance is less than 50 Ω
test voltage: ± 1.8 V
non-contact detection of AC voltage: detection (NCV)
Buzzer: The built-in buzzer sounds when voltage is detected
test voltage range: 90 V - 1000 V AC rms
accuracy: ± (a% display + b digit)
Display: 3 1/2 digit LCD
battery: 2 x 1.5 V AAA/R03P battery (incl.)
dimensions: 125 x 75 x 25 mm
weight: 110 g